setral special lubricants
We help you reducing your lubricant costs!
Please, follow this link: lubricant costs
Technical support for solving your lubricant problem!
Please, follow this link: Technical Support
Please check our Setral database for products.
Please, follow this link: search product
Setral Chemie GmbH - virtual stand on http://www.directindustry.com
Setral Chemie GmbH - virtual stand on http://www.exportpages.com
Please, choose one of the following categories:
Pastes Greases Bonded Lubricants / Coatings Aerosols High temperature Oils
Special Oils Metal-working Fluids Cleaner Additives Solid Lubricants
Types of Lubricants
Solid lubricants
Solid lubricants are usually used for lubrication application running under extreme conditions (e.g. application in the boundary friction area). Setral® has a portfolio of products (MIPO® series) to offer that often can be used as alternative to molybdenum disulphide (MoS2). The usage can be directly as powder, in suspensions, in pastes, in lubricating greases, in metallic films, in bonded lubricants etc.. Typical application are e.g. anti-friction linings, rubber, plastics etc..
Pastes
Pastes are used in very slowly running bearings (rolling and plain bearing), under simple sliding procedures, as assembly pastes, separating agents or as high temperature pastes at temperatures above +300°C (evaporation of the base oil). The use of solid lubricants make pastes suitable for extreme heavy load applications. In the broad range of pastes of Setral® the MIPO® technology is used for the improvement of the separation and lubricating properties.
Lubricating Greases
Greases are the " all-rounder" among the lubricants and find use in practically every industry. They cover broad ranges of temperature, speed and load. Application areas can be in dry, dusty as well as wet, corrosive environments. Setral lubricating greases are often based on "MolyGold", a particularly developed technology for the reduction of wear and friction.
Bonded lubricants
Bonded lubricants are pure specialists and are used above all where their advantages like clean working, economical lubricant consumption, stability under vacuum, resistance to radioactive radiation and very wide temperature range (- 200°C to +650°C) are particularly demanded. Bonded Lubricants always consist of a solvent, a binder, and solid lubricant. Setral® uses among others its MIPO® -technology as solid lubricants.
Technical Aerosols
For easy application the most important Setral®-products are also offered in aerosol form. Especially in work shops and maintenance they are favored because of their easy handling. It speaks for itself that one can also find the products based on MIPO® and MolyGold® technology in this range. On top of this there are also products having NSF H1-listing which are suitable for food processing machinery or applications where physiologic safe products are required.
High-temperature Oils
The performance requirements for modern lubricating oils, especially in high temperature application are continuously increasing. Setral® high temperature oils are developed for these application in particular and are very often based on the MolyGold® technology. As an example oils for the chain lubrication, suitable to work under temperatures up to +300°C (containing solids up to +600°C), should be mentioned here. Besides outstanding ageing resistance, lowest possible evaporation losses and consequently reduced consumption are expected.
Oils
In many application common hydraulic-, gear and compressor oils cannot withstand the increased requirements. Nowadays modern compressor oils offer lifetime of 10.000h and more. This is only feasible by means of using suitable base oils and additives. In gear boxes high performance gear oils based on MolyGold® provide reduced friction and thus reasonable energy savings and longer life because of lowered stead-state temperatures.
Metal working Fluids
No other range of lubricants came into focus regarding toxicity and environmental impact like the metal working oils. Reason for that were among others the direct exposure of the user (skin contact, aspiration) and the problematic waste water treatment in case oft he water miscible oils. Setral® metal working fluids meet these requirements but they also offer the required cutting, grinding and lapping properties. State-of-the-art formulation guarantee to meet these requirements.
Cleaners and Degreasers
Best possible performance of high performance lubricants can be achieved by means of professional cleaning of the machine parts prior to initial filling. By doing so best contact of the lubricant to the surface can be assured. Besides outstanding cleaning effect environmental friendliness and protection of the user has to be taken into account. Depending on the application water soluble as well as solvent based cleaners are offered.
Additives
Additives are used to support or improve existing properties of the lubricant/base oils. This includes e.g. oxidation stability, load carrying capacity (EP-properties) or lubricity. They can also be used to generate additional properties such as corrosion protection, wetting properties, flow at low temperatures. Making special lubricants requires the use of synergistic combinations of different additives as can be found in the MolyGold® technology.
SETRALIT®-natural fibersThe ultrasonic methodThe basic raw material of SETRALIT®-Fibre is a non-wood natural fibre which is generally called “vegetable fibre”. In many cases this is a bast fibre like hemp, flax, nettle, kenaf... more MIPO® & MoS2Cold forging with MIPO: Lubricants and especially solid lubricants are used, not only to ease the movement direction of the cold metal under high pressure, but also to serve as separating agent, to fast... more SETRAL® - Lubricants
Setral high-performance lubricants lead to higher outputs and additionally ensure an enormous economic...
R&D Services: Setral develops and produces high performance as well as special lubricants... more
Job Order Production: We manufacture lubricants according to your instructions... more Private Label: We have the ability to produce and promptly deliver your own products. A multitude of packages... more Being an innovativ producer of high performance lubricants, setral supports our customers to gain effectiv profit by using high quality solutions. |
